NLECO > Customer Support > Belt Options

Belt Options

Rough Tops
NLE #47- 2 Ply 150 Black RT x FS* – This rugged appearance 2 ply belt has a deep, nonskid hemp impression rough top surface that enables products to be conveyed on inclines and declines. The grip like impression holds products and minimizes any slide back of loads. The belts bottom surface (FS) has been coated to provide the optimal surface for any conveyor application.
NLE #53 – 2 Ply 100 Black Wedge Grip x BB – This belts top cover features a diamond shaped profile molded in a diagonal pattern. This “wedge grip” pattern provides an unusually high coefficient of friction for conveying bagged and packaged goods up the very steepest of inclines. The belts bare back (BB) non-coated low friction back surface keeps belts running smooth, flat and quiet.
NLE #103B – 2 Ply 220 Chevron Top x BB – This belt’s SBR rubber top combined with 2 polyester fabric plies provide strength help minimize stretch for use in longer run rough top applications. The belts herringbone pattern of alternating rows of solid SBR rubber chevron profiles form a cover highly capable of moving free flowing bulk solids. It’s designed to carry materials such as grains, foodstuffs, feeds and fertilizers up steep inclines. The belts bare back (BB) non-coated low friction back surface keeps belts running smooth, flat and quiet.
Non-Marking
NLE # 95 – PVC 120 White Cover x MSK – This is an all around excellent value white belt. The belts bottom surface is skim coated (MSK) to help resist grease, fat and mineral oil exposure.
ToughtTrak Belts
NLE #251 – 2 Ply Black PVC x IMPG* – This specially compounded economical, oil and cut resistant PVC cover is the ideal surface for general purpose conveying. This belt runs smooth, flat and quiet because the back is impregnated (coated) with a filler material resulting in a soft and level, low noise surface.
NLE #249 – 2 Ply Green Urethane x IMPG – This is an economical yet high quality thin urethane belt with superior oil resistance and excellent cut and gouge resistance. It’s an excellent economical choice for conveying sharp machined parts where an abundance of cutting oil is present. This belt runs smooth, flat and quiet because the bottom is impregnated (coated) with a filler material resulting in a soft and level, low noise surface. The smooth top also makes it a good choice for light duty accumulating applications.
NLE #224 – 2 Ply White PVC SC x IMPG Bottom – This is an all purpose, low cost non-marking belt. It’s ideal for transporting fatty, oily and watery materials. This belt runs smooth, flat and quiet because the bottom is impregnated (coated) with a filler material resulting in a soft and level, low noise surface.
Accumulation Applications
NLE #106 – 3 Ply 105 Black FS x FS – This belt has long been the standard for a wide variety of conveyor applications including both slider/roller bed service. It is an economical choice for a multitude of industrial uses where rubber covers are not necessary or desirable. The 3 ply construction adds strength and wear properties without sacrificing flexibility. Both surfaces (FS) have been coated for optimal running conditions.
NLE #107 – 3 Ply 105 Tan FS x FS – This belt is non-marking and a standard belt for conveying products in slider bed and roller bed applications. Often used to conveyor wood and other building products which might otherwise be marked by black belting. Can be vulcanized to endless lengths. The 3 ply construction adds strength and wear properties without sacrificing flexibility. Both surfaces (FS) have been coated for optimal running conditions.
General Purpose Applications
NLE #65 – PVC 120 Black Cover x FS* – This is a proven belt with a history for long wear and problem free performance. The smooth RMV top cover resists oil, grease, and chemicals and has good rip, tear, and gouge resistance. The belts bottom is a friction surface (FS) that has been coated to provide the optimal surface for any conveyor application.
NLE #229 – 2 Ply PVC Green SC x BB – This belts low noise bare back (BB) belt combined with a low cost PVC cover makes it an all around, low cost general purpose conveyor belt. The PVC cover also has good resistance to cuts, abrasions, vegetable oils, mineral oils, and animal fats.
NLE #250 – 2 Ply Green PVC Rough Top x BB – This high grip, grease and oil resistant PVC belt has a nonskid textured surface that enables packages, boxes and other products to be conveyed on both inclines and declines. This belt runs smooth, flat and quiet due to the special low noise cover and its bare back that provides a low friction, low noise surface.
Urethane & Nitriles
#51A – 3 Ply Carboxylated Nitrile RT x FS – This belt is designed to be used in the toughest rough top applications. The blue carboxylated nitrile surface is a Superior surface providing excellent cut and gouge resistance and a longer lasting belt than general rough top belts. The 3 ply construction adds strength and wear properties without sacrificing flexibility. The belts bottom surface (FS) has been coated to provide the optimal surface for any conveyor application.
#195 – 3 Ply PNT 150 Tan Nitrile Slip Top x FS – This slip top belt features an abrasion resistant bare nylon top ply that adds strength and durability. It’s an excellent choice for stall and accumulating applications where abrasive materials and oil and grease are present. The 3 ply construction adds strength and wear properties without sacrificing flexibility. The bottom friction surface (FS) has been coated for optimal running conditions.